Drain Line Jetting
Hydro jetting uses high water pressure to clean pipes removing all build up that has accumulated inside the pipeline. To prevent your main lines and drains from clogging or to remove pipe build up hydro jetting is highly suggested to be done once every 3 to 9 months. Depending on the business traffic flow and the consumption of waste and grease this may vary from one company to another.
Rooting / Snaking
In many cases rooting can unclog the drains by cutting through the blockage. While hydro jetting uses high water pressure to clean the pipelines, rooting uses traditional steel cable machinery to cut out blockages. Depending on the type of line different snake size is used for better results. Many plumbers do not offer hydro jetting due to the high cost of hydro jet machines. Therefore, snaking a line may fix the problem for the time being but if the problem continues to arise; most likely it is time for the line to be hydro jetted.